KiwiMill: trade show model
Tankless Water Heater Model
This tankless water heater model is approximately 1/3 the size of the real product and stands about 3 feet tall. Tankless water heaters are a more efficient design than traditional units. The frame of the water heater model is made [ more ]
Bridge Construction Model
This 1/2 scale bridge construction model is built for trade show use. Our client’s product is designed to make bridge building more cost effective by pre-casting the forms that hold up beams. The goal of this model was to show [ more ]
Truck Storage Model
This truck storage model was built to showcase different storage systems designed to make working out of a truck easier and safer. Traditionally, our client would bring a full sized truck to trade shows to highlight their products inside. They [ more ]
Cooling System Model
This cooling system model was built for trade show use. The actual product is a very complex design. It is not always necessary to replicate a product in exact detail. Sometimes that can make a scale model too “busy”. A product [ more ]
Cooling System Model
This cooling system model is a simplified display of a refrigerated production facility. The purpose of the model was to highlight the client’s piping system, shown in bright colors. The rest of the equipment was made into simple, easily identified [ more ]
Ship Propulsion Model
This ship propulsion model demonstrates three different ways electric motors can be added to a ship’s propulsion system. The model itself consisted of a “slice” or portion of a ship’s engine room. Miniaturized models of our client’s product (in blue) [ more ]
Power Transformer Model
This power transformer model showcases our client’s product. The product is small enough to be brought to trade shows by itself, but with the use of a model, it can be featured in its natural environment. The power transformer model depicts three [ more ]
Capacitor Model
This capacitor model is a larger than life replica of an electronic component, designed to attract attention at a trade show. The actual product is only an inch and a half in size. KiwiMill vacuum formed the body of the [ more ]
Furnace Model
This furnace model features a lift off top and unique materials for trade show use. The body of the model is made out of sheet metal to mimic the materials of the real product, as well as to offer structural [ more ]
Solar Panel Model
This is a motorized solar panel model. It’s made to mimic the real product, which is programmed to follow the sun. The model can be easily transported to trade shows for display and demonstration. The solar panel model is 1:5 [ more ]
Propane Facility Model
This propane facility model depicts a natural gas refining site. The propane facility model included a 1:24 scale truck, buildings, machinery and piping. The model was made out of sheet plastics, brass tubing, 3D printed parts and mounted on a [ more ]
Fuel Monitoring Cabinet
This Fuel Monitoring Cabinet was built for trade show use. The model is in 1:3 scale. It resembles the real product but is lighter, smaller and easier to transport to trade shows. The cabinets of the Fuel Monitoring Cabinet were [ more ]
Another AHR Expo Trade Show Model
This trade show model of a Fuel Monitoring Cabinet debuted this past January at the AHR Expo at the Javits Center in NYC. It was one of three models KiwiMill built for separate clients represented at this particular trade show. [ more ]
Vapor Absorption Model
This vapor absorption model was built for trade show use for an international customer. The real life machine takes hot exhaust gas and chills it with water. Virtually all of the parts on the vapor absorption model were 3D printed. [ more ]
Vapor Absorption Model at the AHR Expo, NYC
This vapor absorption model was one of three different models that KiwiMill built for the AHR Expo 2014. This annual trade show is held at the Javits Center in NYC. Virtually all of the parts on the vapor [ more ]
Cutaway Model of Energy Product
Cutaway models are a very popular way to display a product at trade shows.They offer a glimpse inside a product, while still representing its over all design. By increasing the scale and adding cutaway features, this particular cutaway model seeks [ more ]
Engineering Skid Model
KiwiMill was asked to build an engineering skid model of industrial equipment produced by Energy Recovery. This product is used to harness fluid energy. The engineering skid model is a combination of several materials. Aluminum pipes and plastic plumbing parts [ more ]
Industrial Tank Battery Model
This tank battery model was requested by our client, FET, for trade show use. It highlights the design structure of this industrial equipment in 1:35 scale. The piping and tanks are built on modular units that are bolted together on [ more ]
Industrial Water Cooler Model
This 1/4 scale water cooler model is for trade show use. It features both a cutaway design and modular/removable parts. The cutaway section reveals a fin and pipe piece that was 3D printed. ABS, acrylic and styrene made up the [ more ]
Tank Battery Model Shows Modular Design
This tank battery model was requested by our client, FET, for trade show use. It highlights the design structure of this industrial equipment in 1:35 scale. The piping and tanks are built on modular units that are bolted together [ more ]
Machine Screw Model
Our client requested a custom machine screw model to showcase the unique keyway design of their product. In order to provide tamper-proof screw and bolts, the keyway shape itself is specifically designed for each customer order – no two are [ more ]
Product Model of a Cooler
Our client needed a product model of a new line of coolers they were introducing at a trade show. The actual coolers were still in production and unavailable for the upcoming demonstration. In this instance, a 1:1 scale replica was [ more ]
PX-220 Industrial Cutaway Model
Industrial cutaway model of a PX-220 scale model built for Energy Recovery in California. The PX-220 is used in desalinization plants to extract some of the energy used during the process and put it back into the system drastically cutting [ more ]
Barge Turbine Model
1/25th scale turbine model with a fiberglass shroud, 2″ clear acrylic barge and brass support structure. The turbine is designed to generate electricity in water currents.
Storm Drainage Model
Rotondo was looking for a unique trade show display for their StormPod product. We came up with the idea of a storm drainage model that involved a large replica of the product made into a table. This display does double duty [ more ]
MATV Military Truck Model
This MATV military truck model was made for heavy duty trade show use. This military truck model was made mostly out of metal, with some of the details 3D printed. Military trucks are excellent choices for trade show models as they are easier to [ more ]
Diesel Generator Model
This diesel generator model was built to insert into a larger model of an expandable shelter. The model was built from a mix of materials, including brass strips, ABS plastic, Ren board and evergreen strips. The diesel generator model is the part that [ more ]
Trade Show Model with Working Parts
This trade show model was commissioned by our client, Fisher Industries, to capture the key features of their air separator product. The model is a cut-away design with working parts. Model maker, Mike, created a design made mostly out of [ more ]
Mixing Tank Model
This is a mixing tank model used for sales. This working model demonstrated the properties of the product, including movement. It was easier to transport and set up at sales meetings than the actual product. This is a mixing tank model used [ more ]
Orion Ion Beam Microscope Model
This Orion Ion Beam Microscope model was built for our customer to be used at various trade shows at the Zeiss booth.
Large Barcode Scanner Model
This model was a HUGE barcode scanner model made for trade show display.
Times Square Model
To create a Times Square model, KiwiMill used Google Earth to download pictures of this NYC icon. Looking at commonly sized objects in the photos such as people, windows, doors and vehicles, the team was able to estimate measurements for [ more ]
Military Truck Model with Radar
This military truck model was a kit bashed tractor trailer cab transformed into a military vehicle for a client who makes circuit boards for radars. We started with a standard model kit of a tractor trailer and customized it to [ more ]
Cell Tower Model
This is a 1/14th scale (22″ x 40″) cell tower model and support equipment for trade show display. Everything on this cell tower model (except the trees) was custom made by our talented in-house model makers. Notice the level of [ more ]
Join Us Now!