This cooling system model is a simplified display of a refrigerated production facility. The purpose of the model was to highlight the client’s piping system, shown in bright colors. The rest of the equipment was made into simple, easily identified [ more →]

This power transformer model showcases our client’s product. The product is small enough to be brought to trade shows by itself, but with the use of a model, it can be featured in its natural environment. The power transformer model depicts three [ more →]

This lubrication system model was built to highlight our client’s particular product within an overall industrial system. The colored portion of the model consists of our client’s product. The grey portions of the model provide a backdrop for the featured product. It [ more →]

This radio communications model was made out of machinist’s board with cast resin fins. For realism, real RF connectors were used on the model. Aluminum covers were created for the radio communications model, to mimic the real product as well. [ more →]

This capacitor model is a larger than life replica of an electronic component, designed to attract attention at a trade show. The actual product is only an inch and a half in size. KiwiMill vacuum formed the body of the [ more →]

This PV skid model is a great example of how a simple, clean, medium detail replica can make a big impact. KiwiMill built this PV skid model in a week or so, out of laser cut and detailed plastics. It [ more →]

A while back KiwiMill worked on this propane facility model depicting a natural gas refining site. The propane facility model included a 1:24 scale truck, buildings, machinery and piping. The model was made out of sheet plastics, brass tubing, 3D printed [ more →]

This propane facility model depicts a natural gas refining site. The propane facility model included a 1:24 scale truck, buildings, machinery and piping. The model was made out of sheet plastics, brass tubing, 3D printed parts and mounted on a [ more →]

This is another industrial skid model of equipment produced by Energy Recovery. These products are used to harness fluid energy on job sites. These models are used for display in trade show booths. This industrial skid model was built with [ more →]

This Fuel Monitoring Cabinet was built for trade show use. The model is in 1:3 scale. It resembles the real product but is lighter, smaller and easier to transport to trade shows. The cabinets of the Fuel Monitoring Cabinet were [ more →]

This vapor absorption model was built for trade show use for an international customer. The real life machine takes hot exhaust gas and chills it with water. Virtually all of the parts on the vapor absorption model were 3D printed. [ more →]

KiwiMill was asked to build an engineering skid model of industrial equipment produced by Energy Recovery.  This product is used to harness fluid energy. The engineering skid model is a combination of several materials. Aluminum pipes and plastic plumbing parts [ more →]

Cutaway models are a very popular way to display a product at trade shows. These two cutaway models show close up aspects of a full industrial skid. By increasing the scale and adding cutaway features, these models seek to highlight [ more →]

KiwiMill was recently asked to build an engineering skid model of industrial equipment. This particular product is used to harness fluid energy. The skid model is a combination of several materials. Because of the scale of the model, plastic and [ more →]

This tank battery model was requested by our client, FET, for trade show use. It highlights the design structure of this industrial equipment in 1:35 scale. The piping and tanks are built on modular units that are bolted together on [ more →]

This 1/4 scale water cooler model is for trade show use. It features both a cutaway design and modular/removable parts. The cutaway section reveals a fin and pipe piece that was 3D printed. ABS, acrylic and styrene made up the [ more →]

  This tank battery model was requested by our client, FET, for trade show use. It highlights the design structure of this industrial equipment in 1:35 scale. The piping and tanks are built on modular units that are bolted together [ more →]

This land rig catwalk model is a replica of a product that lifts drilling pipe to a drill rig for the oil industry. The catwalk model is constructed mostly of brass and aluminum. It has 3D printed model parts and [ more →]

Our client requested a custom machine screw model to showcase the unique keyway design of their product. In order to provide tamper-proof screw and bolts, the keyway shape itself is specifically designed for each customer order – no two are [ more →]

Five scale models of nuclear products were constructed for Holtec to be used as training tools. These products extract spent fuel out of nuclear reactors and store and transport the material to permanent locations. These 3/4 inch = 1 ft [ more →]

This was a very fast turn around scale model project for Siemens involving an electrical unit that needed to be replicated for a sales presentation. The scale model was built and shipped in a total of three days using a [ more →]

Industrial cutaway model of a PX-220 scale model built for Energy Recovery in California. The PX-220 is used in desalinization plants to extract some of the energy used during the process and put it back into the system drastically cutting [ more →]

Rotondo was looking for a unique trade show display for their StormPod product. We came up with the idea of a storm drainage model that involved a large replica of the product made into a table. This display does double duty [ more →]

This diesel generator model was built to insert into a larger model of an expandable shelter. The model was built from a mix of materials, including brass strips, ABS plastic, Ren board and evergreen strips. The diesel generator model is the part that [ more →]

This is a Heating and Cooling Model used for a trade show display to demonstrate its properties to participants.

This is a full size plastic injection molding model. It was used for both trade shows and lobby display to inform and educate the public about its properties.

Project: Laser Fusion Reactor Model Client: University of Rochester Laboratory of Laser Energetics Scale: 1:8

Built for the Texas Energy Museum, this schematic oil refinery model was used as part of a light and sound show that illustrated the steps of refining.

This is a mixing tank model used for sales. This working model demonstrated the properties of the product, including movement. It was easier to transport and set up at sales meetings than the actual product. This is a mixing tank model used [ more →]